Saw [nokogiri]
Saw
4 For structural materials
1.Gong
Bittern, single-edge, vertical grinding
There are two types: one with a diagonal pattern and one with a straight one. The former is mainly used for large portions of materials, and the latter is mainly used for small portions. 8 inches to 3 inches are normal.
2.Grinding
Hikiri/one blade/horizontal grinding
It is also known as "Kiri". Used for horizontal grinding. 8 inches to 3 inches are normal.
3.Double-edge saw
Ryobanoko / double blade
A common saw with both vertical and horizontal saw teeth on both sides of the saw body. It became popular nationwide since the 1930s. 8 inches to 2 inches are normal.
4.A hole saw
Anabiki Ryobako/double blade
It's used for rough work. The horizontal grinding is Ibarame, which has the same function as a hole saw. Shaku to 3 inches are normal.
- ＊The contents of this page are excerpts from the description of "Takenaka Carpentry Tools Museum Collection No. 1-Saw Hen-".
- ＊The names used in the museum are mainly based on the names of tools used in the Kansai region. The name of the tool may be different depending on the region or researcher.